MOSS & MOULD REMOVER
Purple Strike Commercial 10L
Purple Strike Commercial 10L
Volume pricing, applied automatically at checkout
- From 100 litres — 10% off
- From 200 litres — 15% off
- From 300 litres — 20% off
Ten 10L bottles, five 20L, or any mix that reaches 100 litres. Free trailer hire from 60 litres.
Couldn't load pickup availability
Makes up to 110 litres of ready-to-use spray. Free shipping on all orders over $100.
Double-strength commercial moss, mould and lichen remover. Spray on and walk away — no scrubbing, no water blasting, no rinsing. For roofs, cladding, paths, driveways, fences and paving.
One 10L covers 600m² or more at full strength — about 26 cents a square metre — or up to 1,200m² as a maintenance spray. Volume discounts start at 10 bottles, and orders of 60 litres or more qualify for free application trailer hire in Auckland, Waikato, Bay of Plenty, Christchurch and Dunedin.
198 g/L benzalkonium chloride — double the strength of the domestic formula. Always read and follow the label and dilution instructions before use. Download the safety data sheet.
Collapsible content
How it works
PREPARATION: Ensure the surface is dry before applying. Do not hose or pre-wet the area. If treating roofs, disconnect downpipes to prevent product runoff into tanks or drains. Avoid application if rain is expected within the next 4–5 hours. For best results, apply in overcast, dry conditions to minimize evaporation.
APPLICATION: Thoroughly saturate the dry surface with the diluted mixture. Do not rinse off. For areas that don’t receive direct rainfall or are vertical, some light cleaning may be needed later to remove residue. For persistent contamination, apply a second coat 1–2 months later.
HOW IT WORKS: Once applied, no pressure washing, scrubbing, or rinsing is needed. Natural elements — sun, wind, and rain — will gradually remove dirt, moss, lichen, and stains from the treated surface. In some cases (especially with heavy contamination), full cleaning can take 6–12 months.
Special surface instruction
TIMBER DECKS: For blackened or heavily contaminated areas, lightly brush the surface with water and a short-bristled broom prior to application. Let the surface dry, then apply Purple Strike. (See our website for detailed application advice.)
LICHEN REMOVAL: Apply two coats, about 20 minutes apart, for maximum effectiveness.
MOSS IN LAWNS: Mix 1 part Purple Strike with 10 parts water. Apply directly to affected areas, ensuring a small sample area is tried first. (See our website for detailed application advice.)
POWDER-COATED ALUMINIUM & JOINERY: Test a small area first to check for any color or finish change.
You will also need
The gear people buy alongside it — for measuring, mixing and putting it on safely.
