MOSS & MOULD REMOVER
Purple Strike Domestic 5L
Purple Strike Domestic 5L
Buy more, pay less, applied automatically at checkout
- 2 or more bottles — 10% off
- 4 or more bottles — 20% off
Mix and match the Domestic 5L and the Swift Applicator 2L.
Couldn't load pickup availability
Makes up to 30 litres of ready-to-use spray. Free shipping on all orders over $100.
Home-strength moss, mould and lichen remover. Spray on and walk away — no scrubbing, no water blasting, no rinsing. For roofs, paths, decks, fences and house exteriors.
Green mould and moss usually clear within days to a couple of weeks. Lichen is slower and can take several months, so leave it to do its work rather than respraying.
99 g/L benzalkonium chloride, mixed for everyday use around the house. Bigger job? The Commercial 10L is double the strength, makes 110 litres of spray, and works out better value per litre.
Always read and follow the label and dilution instructions before use. Download the safety data sheet.
Single 5L bottle $59 · Twin Pack $99 · Four-Pack $190
Collapsible content
How it works
PREPARATION: Ensure the surface is dry before applying. Do not hose or pre-wet the area. If treating roofs, disconnect downpipes to prevent product runoff into tanks or drains. Avoid application if rain is expected within the next 4–5 hours. For best results, apply in overcast, dry conditions to minimize evaporation.
APPLICATION: Thoroughly saturate the dry surface with the diluted mixture. Do not rinse off. For areas that don’t receive direct rainfall or are vertical, some light cleaning may be needed later to remove residue. For persistent contamination, apply a second coat 1–2 months later.
HOW IT WORKS: Once applied, no pressure washing, scrubbing, or rinsing is needed. Natural elements — sun, wind, and rain — will gradually remove dirt, moss, lichen, and stains from the treated surface. In some cases (especially with heavy contamination), full cleaning can take 6–12 months.
Special surface instruction
TIMBER DECKS: For blackened or heavily contaminated areas, lightly brush the surface with water and a short-bristled broom prior to application. Let the surface dry, then apply Purple Strike. (See our website for detailed application advice.)
LICHEN REMOVAL: Apply two coats, about 20 minutes apart, for maximum effectiveness.
MOSS IN LAWNS: Mix 1 part Purple Strike with 10 parts water. Apply directly to affected areas, ensuring a small sample area is tried first. (See our website for detailed application advice.)
POWDER-COATED ALUMINIUM & JOINERY: Test a small area first to check for any color or finish change.
You will also need
The gear people buy alongside it — for measuring, mixing and putting it on safely.
